As you probably already know, having mold in your basement can be an extremely dangerous situation. Basement mold is caused by having an excessive amount of moisture in your basement, which is typically caused by unknown leaks. As the mold feeds on organic matter, such as wood, it continues to grow and spread.
If you have a serious case of mold in your home, it’s absolutely imperative that you get rid of it in the safest way possible as soon as possible. Failure to do so could cause your loved ones and you to become unbelievably ill. If you’re not sure how to get rid of mold but you want to do it yourself, make sure to read the following instructions so you can effectively eliminate the mold outbreak in your home.
Analyze the Situation
There are many types of mold that are actually toxic to humans. If you’re unsure of the type of mold that you have, you have allergic reactions to mold, or you have a rather large case of mold in your home, you might want to call in a professional mold remediation service to check out the situation before you start to remove it yourself.
If you choose to remove the mold yourself, there are certain precautions that you need to take. Follow these guidelines to ensure a safe removal process:
- Wear old clothes that you don’t mind throwing away once you’re finished.
- Protect yourself by wearing a respirator, goggles, and gloves.
- Ventilate the room with a box fan but make sure to thoroughly clean it afterward because the mold spores can travel.
- Cover ducts and doors.
- Remove furniture and other objects from the room and clean them well.
Open up the Wall
The first step in removing mold is to open up the wall that it seems to be contaminating. Using a pry bar, take off the baseboards and the trim. Use a screwdriver to examine the affected area.
Removing the Mold
You’re going to have to repair the area so it’s okay to cut the drywall. Make sure that you cut out further than what you can see. Mold can spread so it’s imperative that you get it all. Make sure that the mold is a bit moist to prevent the spores from traveling. It’s essential that you throw away everything that has mold on it. You do this by putting the mold-infested material in double-bagged, heavy-duty plastic bags.
Vacuum up the Debris
Using a wet/dry vacuum cleaner, vacuum up all of the excess debris. It’s important that you purchase extra hoses because the vacuum cleaner must be kept out of the room to prevent the further spread of the spores.
Use Mold Cleaner
The next step is to scrub all of the affected surfaces with a mold cleaning solution. Use one quart of water and half a cup of bleach to effectively kill all of the molds.
Dry and Seal
Using dehumidifiers and fans, dry out the affected area for a few days. Once the area is thoroughly dried, you can begin the sealing process. Paint the area with a pigmented shellac before covering it with a latex-based paint. Now it’s time for you to install brand-new insulation and drywall.
Find the Cause
To prevent mold from coming back, you must find the source of it. Look through your basement for any possible leaks in your pipes or points of entry where water could be coming in. Remember that if something is continuously moist, you’re going to have mold. If you can’t find the source of the moisture, you might want to consider leaving a dehumidifier in your basement at all times.
Effectively removing mold can be a very difficult process. If it’s not done properly, you can risk the chance of the mold spreading, which can be an extremely serious problem. If you’re not 100% confident in your skills, you should really think about hiring a professional mold remediation company to come in and give you a hand. It’s your health and the health of your loved ones, after all, so it’s best to make sure that the job is done correctly the first time.